Platinum chip temperature probes in SMD design on epoxy PCB as per DIN EN 60 751, PCSE design (90.6122)

Platinum chip temperature probes of the PCSE design are pre-finished measuring inserts. An equipped platinum SMD temperature probe recording the temperature as an active component is located on epoxy PCB.
The PCSE design considerably simplifies further finishing work on various probe variants with connection cable. The pre-finished measuring insert with SMD temperature probe can be directly inserted into a sheath once a connection cable has been soldered to it. The PCB largely protects the temperature probe against damage. This design excludes the risk of jamming the temperature sensor or bending or short-circuiting connection wires.
Another advantage is the fact that possible tensile load cannot be directly transmitted to the SMD temperature probe through the connection cable. The thin conductor paths between the connection contact and the temperature probe additionally minimize measuring errors caused by heat dissipation. In addition, the mentioned measuring inserts offer the possibility of automated downstream processing, which results in reducing production costs.
Platinum chip temperature probes of the PCSE design are available directly ex stock as Pt 100-, Pt 500- and Pt 1000 measuring inserts.